Stone Fabrication

Request a fabrication quote for a kitchen benchtop, island, bathroom vanity, tabletop or splashback. Use the form below to sketch your project and tell us what you need.

Find an offcut that fits by entering your minimum length and width. Choose a piece to request a cut-to-size quote.

From Preston, Melbourne, we also quote custom stone door thresholds and 3-axis waterjet cutting from DXF or dimensioned PDF drawings. Unsure what stone you have? Send a photo for stone identification or colour matching.

Can’t find the stone you’re looking for? Include your preferred stone type and colour. We’ll check what’s available or look into sourcing a suitable stone.

Fabrication is quoted separately from the price of the stone. Browse slabs and offcuts.

Stone cut to size in Melbourne

Request cutting and edge finishing for stone shelving, splashbacks and custom vanity tops. Include the finished length and width, your edge preference and any basin or tap cut-outs. Sketch your piece or add a plan.

Shop stone by project

Buy an in-stock piece online, sketch what you need for a quote, or share a PDF, photo or hand-drawn plan.

  • Door thresholds

    Measure between the jambs, then choose straight polish, 20mm edgework or a bevel in the threshold drawing.

  • Stone shelves & window sills

    Enter length and depth and tell us which edges will be visible. A photo helps show the window recess or fixing location.

  • Tabletops & vanity tops

    Sketch a tabletop or vanity, add the measurements and show any basin cut-out. For round tops, include the diameter in the notes.

  • Stair & entry pieces

    Add each tread, riser or landing as a separate piece. Tell us how many you need and which edges are exposed.

  • Small-project stone bundles

    Request matching pieces for a laundry, powder room or fireplace surround. Add each piece and tell us whether the veining should line up.

  • Marble trays & display plinths

    Tell us the size, quantity, stone colour and finish you want. Send a reference for shaped pieces or mitred plinths.

  • Stone matching & replacements

    Send photos of the existing stone, including its edge, and the replacement dimensions. We’ll check available stock for the closest match.

  • Identify a stone or match its colour

    Attach a clear photo in natural light. A close-up of the pattern and a photo of the whole piece help. Tell us what you’d like to know and we’ll reply with our best assessment of the stone or suggest similar colours. Photos give an indication only.

  • Bridge saw cutting

    Request straight cuts to size for stone slabs and offcuts. Send your cutting list with finished dimensions in millimetres, quantities and the stone you’d like to use.

  • Waterjet cutting

    We offer 3-axis waterjet cutting only. Send a DXF or a dimensioned PDF drawing for a quote.

    Send a DXF or PDF drawing

    Attach the drawing before sending. Include the stone type, thickness and quantity if you know them.

    Send drawing on WhatsApp Email drawing

Request a standard-size shelf, sill or threshold

Use these sizes as a starting point for a quote. We’ll confirm suitable stone, finish and price before you order.

  • Shower niche shelf: 300 × 100 mm or 600 × 100 mm
  • Window sill: 600 × 150 mm or 900 × 150 mm
  • Door threshold: 820 × 100 mm or 920 × 100 mm

Request a shelf or sill quote · Measure and request a threshold

Reorder stone for a trade job

Request a fabrication quote

Enter your approximate dimensions to draw a sketch. Add each piece, select waterfall ends and drag cut-outs into position.

1. Project and edgework

Choose a colour or design to enquire about. We’ll confirm availability and check the exact range before quoting.

2. Stone pieces

Add each benchtop, island, return or other stone piece. Select a piece to edit its own measurements and waterfall ends.

Piece 1
Waterfall ends

Tick either or both short ends of the piece. They will be highlighted on the drawing.

3. Sinks and cut-outs

Select a sink shape, then drag it onto the stone below. Multiple sinks or cut-outs can be added to each piece.

No sinks or cut-outs placed on this piece.

4. Interactive sketch

Enter the dimensions above to generate an indicative shape. Use Move sink to drag fittings with your finger, or choose Draw to mark joins and other details.

Indicative layout only, not to scale for fabrication. Final sizes, joints, cut-outs and support requirements must be confirmed by a stonemason.

5. Other details and plans

Files are not included when you email this form. Use Share plans & sketch separately to send your PDF, photos and saved rough drawings through your phone.

Your contact details

The email includes details for every piece, including waterfall ends and approximate sink positions. PDFs and drawings must be shared separately.