A marble kitchen benchtop can be the centrepiece of a kitchen, but choosing the right slab takes a little care. Marble is a natural stone, so every slab is different. This guide walks through what to check — size, finish, veining, and the slab itself — before you buy a marble slab for your kitchen benchtop in Melbourne.
1. Start with your measurements
Measure your benchtop carefully — length, depth, and any cut-outs for a sink or cooktop — and send those measurements to your stonemason. Your stonemason can tell you how big a slab you need, allowing for cutting, joins and the edge profile. Then look for a slab that is big enough, with spare stone for cutting. Slab dimensions are listed on every Stone Deals product page, so you can shortlist slabs that fit before you visit.
If you are not sure what to send your stonemason, read our guide to measuring for a benchtop — or simply send us your measurements and the colour you are looking for, and we can see if we can locate a slab for you.
2. Choose the colour and veining
Marble comes in many colours — white with grey veins, warm cream, deep green, terracotta red, black with white veins, and more. Think about your cabinets, floor and splashback, and whether you want the benchtop to stand out or blend in. Veining matters too: some slabs have bold, dramatic veins, others are quieter. Because natural stone varies between slabs, always look at the photo of the actual slab you would be buying, not a generic photo of that stone type.
Browse the marble slabs collection to compare colours, or the kitchen benchtops collection to see slabs that may suit a benchtop.
3. Choose the finish
The finish changes how marble looks and feels. Polished marble is glossy and brings out the colour and veining. Honed marble is matte, with a softer, more understated look. Leather finish has a textured feel. There is no single right finish — it depends on the look you want and how you use your kitchen. The finish is listed on each slab, and your stonemason can advise on which finish suits your benchtop.
4. Check the slab itself
Before you buy, check the slab for anything that affects its usable area — irregular edges, a notch, a missing section, or a crack. Stone Deals lists these details on the product page where they apply, and photographs show the actual material available. We recommend inspecting the slab in person before buying or collecting. Viewing is by appointment only in Preston, Victoria.
Also check the thickness — most slabs are 20mm, with a tolerance of plus or minus 10% — and confirm with your stonemason that the thickness suits your benchtop design.
5. Ask about fabrication, delivery and collection
Fabrication can be priced separately — please enquire for a quotation. You will need to arrange your own stonemason for cutting and installation. Delivery is available upon quotation only, and is not included in the listed price. Collection is by appointment only from Preston, and pick-up must be done by an A-frame or a professional stone carrier. Full payment is required before collection, and there are no holds without a deposit.
Each slab is also listed elsewhere, so please enquire before purchasing to confirm availability. Sold as seen — please inspect the slab before buying or collecting. No returns for change of mind, subject to Australian Consumer Law.
Ready to look?
Browse marble slabs in Melbourne, or see the kitchen benchtops collection. If you are comparing stones first, read marble vs granite vs quartzite benchtops, and if you are budgeting, read how much a marble slab costs in Melbourne. Looking for a specific colour? Send us a message with your measurements and we can see if we can locate it for you.

0 comments